What you need

• *Hair(1)
• *Birds(1)
• *Transparent water-based liquid glue(1)
• *Water mist(1)
• Comb(1)
• *Hair dryer(1)

Steps

1. 1

   Prepare the wick for rustin

   Cut a previously embossed hair strand of about 10-15 cm.

   
2. 2

   Decommission

   Spread both sides of the wick. For this, give scissors parallel to the hair until you get a rendering of natural hair tips.

   
3. 3

   Clean the wick

   Pass the comb to remove cut hair.

   
4. 4

   Glue the wick

   Put glue on the wick until saturation. To hold the wick between the index finger and the left major (for right-handers) and apply the glue with the index finger and the right hand major. Reverse for the left-handed.

   

   
5. 5

   Paste the wick on the wig

   Place the wick on the part to fill with the fingers. Adhesion the wick to the wig.

   
6. 6

   Fold the wick in the wig

   Spray water on the wick. Paint edges while holding the wick in the middle with the other hand. Paint from the middle to the edge with the back of the comb so that the glue enters the wig.

   

   

   
7. 7

   Dry the rustin

   Dry the rustine in the hair dryer maximum power and heat until the wick is completely dry. Do not hesitate to touch the wick with the fingers during drying to check the drying condition.